Zometric Logo
AIAG core tools for IATF 16949

Automotive core tools software

Zometric Core Tools is a system of interconnected products that runs the five AIAG core tools, APQP, FMEA, MSA, SPC and PPAP, together with the process flow and Control Plan, on one linked record. A change to the PFMEA reaches the Control Plan, and the PPAP is assembled from the data already released.

Demo request

Tell us about your factory.

30-minute call, zero obligation. We map the right Zometric products to your KPIs and priority areas.

Prefer to talk now?

See all products
  • IATF 16949
  • AIAG APQP 3rd Edition
  • AIAG & VDA FMEA
  • AIAG Control Plan
  • AIAG MSA
  • AIAG SPC
  • AIAG PPAP 4th Edition

Trusted by Industry Leaders

IATF 16949 expects automotive suppliers to use the core tools, and most plants run them as separate spreadsheets and templates kept in step by hand. The process flow, PFMEA and Control Plan drift apart, APQP status is a colour someone typed, and every PPAP is a binder rebuilt from copies. In Zometric the core tools are linked records: each process step is defined once, each control is carried through, and each deliverable's status is read from the document behind it.

What the core tools cover

The products that make up Zometric Core Tools

Each core tool runs in its own product on the Zometric platform, with its own page. License the whole system, or start with the tool behind your next customer launch and add the rest on the same data.

APQP

Programs, gates, timing and deliverables on APQP 3rd edition, with each deliverable linked to the real document behind it, so "PFMEA complete" means the PFMEA is released.

Process flow

Every process step defined once and shared by the PFMEA and the Control Plan, as a table and as a diagram.

FMEA

DFMEA, PFMEA and FMEA-MSR on the AIAG-VDA 7-step method, with Action Priority updated as you rate and a DFMEA change re-rating the PFMEA behind it.

Control Plan

Rows generated from the process flow and the PFMEA, one per characteristic at each operation, kept in sync through a preview of what would change, without overwriting what an engineer wrote by hand.

MSA

Gauge calibration and MSA studies such as Gage R&R, judged against the thresholds you set for each gauge category.

PPAP

PPAP 4th edition packages whose 18 elements resolve against the released process flow, PFMEA, Control Plan, measurement and capability data, with every gap explained.

Customer approval

Your customer reviews the Control Plan, PFMEA or PPAP from a secure link and records the warrant decision, while black-box sharing keeps your know-how hidden.

One linked record

Core tools that stay in step

Defined once, carried through

Process steps, failure chains and controls are linked records, so the PFMEA, Control Plan and PPAP all read from the same source instead of copies.

Problems feed back into the risk analysis

A CAPA flags the PFMEA and the Control Plan for review with the lesson learned, so the next launch starts from what the last problem taught.

Ready for IATF 16949 audits

VDA 6.3 scoring and Layered Process Audits run on the same platform, with every nonconformity followed to verified effectiveness.

Core tools questions

Automotive core tools software FAQ

What are the automotive core tools?

The AIAG core tools are five methods automotive suppliers use to plan and prove quality: Advanced Product Quality Planning (APQP), Failure Mode and Effects Analysis (FMEA), Measurement System Analysis (MSA), Statistical Process Control (SPC) and the Production Part Approval Process (PPAP). The process flow and Control Plan are produced as part of APQP. IATF 16949 expects suppliers to use them.

Which editions does Zometric follow?

APQP 3rd edition, the AIAG & VDA FMEA Handbook (1st edition, 2019), the AIAG Control Plan reference manual (1st edition, 2024), PPAP 4th edition, and the AIAG MSA and SPC manuals.

How do the PFMEA and Control Plan stay in sync?

Control Plan rows are generated from the process flow and the PFMEA, one per characteristic at each operation. When the risk analysis changes, a sync preview shows exactly what would change in the Control Plan, and what an engineer wrote by hand is never overwritten.

Can our customer approve a PPAP online?

Yes. Through the Supplier Portal, your customer's reviewer approves or rejects element by element and records the warrant disposition, including an interim approval. The decision is e-signed and written straight into the PPAP submission.

Do we have to license every core tool?

No. Zometric Core Tools is made of separate products, so you can license the whole system or start with one tool, such as FMEA or PPAP, and add the rest on the same data. A system costs less than its products bought separately, and a product that belongs to more than one system is charged only once.

Map your core tools

See how your next launch would run on linked core tools

A 30-minute discovery call maps your APQP, FMEA, Control Plan, MSA, SPC and PPAP work to the products that run it.

Demo request

Tell us about your factory.

30-minute call, zero obligation. We map the right Zometric products to your KPIs and priority areas.

Prefer to talk now?

Email us